Skip to main content

Printing Checks in Ambrook

What check paper to buy, how to turn on check printing, and how to print, reprint and void checks from your Ledger or bills.

Written by Paige Wyler

With check printing, Ambrook fills in your checks and you print them on your own check paper. Ambrook doesn't mail these checks. If you want Ambrook to print and mail a check to your vendor, pay the bill by mailed check from your Ambrook Wallet instead.

Supported Checks and Check Paper Requirements

You can print checks from any bank account on your Accounts page, connected or manual. At this time, the Ambrook Wallet can't print checks. To pay by paper check from your Wallet, use a mailed check.

Printing works in a web browser on a computer. The mobile app doesn't print checks.


What check paper to buy

Ambrook prints only the details of each payment. Your check paper supplies everything else, so it needs to be the right kind.

Your check paper must be:

  • Voucher-style, one check per page. The check sits on the page with two stubs. Three-checks-per-page sheets won't work.

  • Pre-printed with your bank details: account number, routing number and check numbers, for the account you'll write checks from.

  • Standard checks with the usual lines and labels, like "Pay to the Order of", "Date", "Memo" and the signature line. Don't buy blank check stock. Ambrook doesn't print lines, labels or bank details.

What Ambrook prints on the check:

  • Date

  • Payee name

  • Amount, in numbers and in words

  • Memo

  • The payee's mailing address, if the contact has a complete address saved (street, city, state and ZIP)

Ambrook also prints payment details on the stubs. See What prints on the stub.

Where to buy: order from your bank or any check supplier. Ask for voucher checks, one per page, for use with accounting software.

Check position: Ambrook's standard layout expects the check at the top of the page. If your paper has the check in the middle, tell support when you ask to turn on check printing, and they'll adjust your layout.


Enabling Printed Checks

To enable printed checks in Ambrook:

  1. Contact Ambrook support via support@ambrook.com or the in-app chat

  2. Tell us the name (and last 4 digits if they're connected) of each bank account you'd like to enable for check printing


Printing a Test Check

Once our team has enabled check printing for you, follow these steps to print a test check to ensure everything is working properly and the check format aligns with your check paper:

  1. Load a piece of regular paper into your printer

  2. Download and print our test check on the regular paper (the test check is at the end of this section and also attached to the bottom of this article)

    1. Important: Make sure your print settings are “Fit to Page” otherwise your check alignment may be incorrect!

  3. Overlay the printed test check on your check paper to check the alignment is correct. If it needs to be adjusted, contact support.


Printing Checks

Once you’ve printed a test check, follow these steps to print real checks from Ambrook. There are three ways to print a check in Ambrook: from your Ledger, a single bill, or from paying multiple bills. Print it on your check paper with print settings set to Fit to Page.

From the Ledger

  1. Go to Ledger

  2. Click +New

  3. Click Check

  4. Fill out the details

  5. Click Save and Print

Printing a check you saved earlier

If you wrote a check in the Ledger and clicked Save instead of Save & Print, you can still print it:

  1. Go to Ledger and click the check to open it.

  2. Click Print Check.

  3. Confirm the check number and date, then click Print Check.

You’ll only see Print Check if the check is still pending and the account has check printing turned on.

From a Bill

  1. Navigate to the Bills section

  2. Select the bill you want to pay or create a new bill

  3. Click Pay

  4. Click payment method and choose Printed Check

  5. Add the check number and memo

  6. Click Finalize and Print

From Multiple Bills

  1. Go to Bills and select the bills you want to pay.

  2. Click Pay.

  3. Set the payment method to Printed Check on each bill and choose the account to pay from.

  4. Review the check numbers, then click Send & Print.

See Paying Multiple Bills at Once for the full walkthrough.

Both paths will open your check as a PDF. If nothing happens, see Troubleshooting Printed Checks below.

Printing a check creates a pending Printed Check entry on your Ledger. When the real check clears your bank, click Clear on that entry to match it to the cleared transaction. If your bank account isn't connected to Ambrook, you can clear the check when you manually enter it or import your bank transactions. Read more on how to clear checks here.


Reprinting a check

Reprint a check if it jammed, printed wrong, or the PDF never opened. The check must still be pending in Ambrook in order to be reprinted.

From a bill:

  1. Go to Bills and open the bill.

  2. In Payments, click the three dots on the check.

  3. Choose Reprint.

From the Ledger (for checks not attached to a bill):

  1. Go to Ledger and find the check. To narrow the list, click Filter → Status → Uncleared.

  2. Click the check to open it.

  3. Click Reprint.

For either one, confirm the check number and date, change them if needed, and click Reprint. The check opens as a PDF in a new tab.

Tip: if you’re reprinting on a new sheet because the first one was ruined, write “VOID” on the ruined check, and change the check number to match the new sheet.


Voiding a printed check

From a bill: open the bill. In Payments, click the three dots on the check, choose Void check, then click Void Check in Ambrook.

From the Ledger: see How to Edit Recorded Checks.

Voiding only voids the check in Ambrook.

To void the paper check, write "VOID" on it, or contact your bank to stop payment if it's already been sent.


Setting up Rolling Check Numbers

Ambrook can fill in the next check number for you, so you don't have to remember it. This works for any account you write checks from, even if check printing isn't turned on.

For each account, after you record your first check with a check number, Ambrook counts up from there. For example, if you enter #123 today, your next check fills in #124.

To change the number Ambrook counts up from:

  1. Go to Accounts.

  2. Click the account.

  3. Scroll down to Details.

  4. Enter a number in Next Check #.


Setting your check preferences

Save time on every check by setting a default account and choosing what prints on the stub.

  1. Go to Settings → Preferences → Checks.

  2. Under Default Account, pick the account you usually write checks from. It's pre-selected whenever you write a printed check, and you can change it on any check.

  3. Turn on Show line items on bill stubs to print a bill's line items on the check stub when you pay one bill.

Only accounts with check printing turned on appear under Default Account. Don't see yours? Contact support to enable check printing for it.


Troubleshooting Printed Checks

The check didn't open

  1. Use the link in Ambrook. If the PDF doesn't open on its own, the print window shows a click here link. Click it to open the check.

  2. Allow pop-ups for ambrook.com. Steps for each browser are below.

  3. Printing several checks in a row? Some pop-up blockers let the first check open and then block the next few for a while. That can make printing look like it works only sometimes. Allow pop-ups for ambrook.com in your browser settings instead of allowing them one at a time.

  4. Turn off ad blockers for ambrook.com.

  5. Reprint the check. See Reprinting a check.

How to allow pop-ups by browser:

  • Google Chrome:

    1. Go to Settings → Privacy and security → Site settings.

    2. Under Content, click Pop-ups and redirects.

    3. Add ambrook.com to the Allowed list.

  • Mozilla Firefox:

    1. Open the menu and select Settings.

    2. Go to Privacy & Security → Permissions.

    3. Uncheck Block pop-up windows, or add ambrook.com as an exception.

  • Safari:

    1. Go to Safari → Settings → Websites.

    2. Select Pop-up Windows and choose Allow for ambrook.com.

  • Microsoft Edge:

    1. Go to Settings → Cookies and site permissions → Pop-ups and redirects.

    2. Add ambrook.com to the Allow list.

Save & Print is greyed out

Hover over the button to see why.

  • "This account isn't set up for check printing." Contact support to turn on check printing for that account.

  • "Printing is only available for pending checks." Set the check's status to Pending.

  • Don't see Save & Print at all? You may be on the mobile app. Use Ambrook in a web browser on a computer.

Fixing check alignment

If your check doesn't line up with your check paper:

  1. Make sure you're printing with the Fit to Page setting.

  2. Print another test check on regular paper and hold it over your check paper to see if it's still off.

  3. If it's still off, contact support with a photo of the printed check and a short description of the misalignment. We can adjust the layout for you.


FAQ

Do my checks need lines and labels, or should they be blank?

Buy standard voucher checks with the usual lines and labels. Ambrook prints only the values (date, payee, amount, memo) into those spaces. Blank check stock won't work.

Can I use my three-per-page checks?

No. Ambrook prints one check per page, so you'll need voucher-style checks.

Can I print checks from my Ambrook Wallet?

No. Printed checks have to come from a bank account at another bank. To pay by paper check from your Wallet, use a mailed check and Ambrook will mail it for you.

Can I print a check to a vendor outside the US?

No. Printed checks can only be made out to payees with a US address.

I turned on check printing but don't see it.

Refresh the page. If you still don't see it, make sure you're on a computer and the account you picked is the one support turned on.

Did this answer your question?