When you borrow money for your operation, such as an operating note, an equipment loan or a mortgage on farmland, you track what you owe as a liability on your balance sheet. Once the loan account is set up, each payment you tag lowers the loan's balance.
This article covers setting up the account. If a loan balance looks wrong, see Troubleshooting Loan Balances. To record payments, see Tagging Loan Payments or Tagging Mortgage Payments.
Before you start
Have your loan statement handy. You'll need the amount you owed on a specific date. You can find this on your statement or in your lender's online portal.
Set up loan accounts manually. We generally don't recommend connecting loan accounts through your bank. Loan accounts often don't sync reliably, and lenders usually report each payment as a single amount without splitting out principal and interest, which can leave the loan's balance wrong in Ambrook. Connected loans can also count principal twice when you tag payments. If your loan is already connected, see Working with a Connected Loan Account.
Choose the right account type
Account type | Use it for |
Loan | General borrowed debt, such as equipment, vehicle and term operating loans |
Mortgage | Debt secured by real estate, such as farmland, buildings or your home |
Line Of Credit | Operating lines you draw on and repay as needed. See Managing a Line of Credit. |
Other Current Liability | Other short-term debt due within a year |
Other Long-Term Liability | Other long-term debt that doesn't fit the types above |
Tip: Create a separate account for each loan, even if you have several with the same lender. Give each one a clear name, such as "Deere – 8R Tractor Loan" or "FCS Operating Note 2026," so it's easy to pick the right account when you tag payments.
Quick guide by loan type
Loan type | Account type | Setting it up | Tagging payments |
Mortgage on land or buildings | Mortgage | Follow the steps below | |
Land contract (seller-financed) | Mortgage or Loan | Recording Land Contracts and Real Estate Financing | |
Operating note with a set term | Loan | Follow the steps below | |
Operating line or line of credit | Line Of Credit | ||
Vehicle or equipment loan | Loan | Follow the steps below. If the lender paid the dealer directly, see that section below. |
Which Starting Date and Starting Balance should I use?
It depends on when you got the loan compared with your books start date, the first date your books in Ambrook cover. That isn't always the day you signed up. For example, if you signed up in September but are entering transactions back to January 1, your books start on January 1.
Your situation | Starting Date | Starting Balance |
You got the loan before your books start date | Your books start date | The amount you owed on your books start date |
You got the loan on or after your books start date | The date you got the loan | $0.00 |
Examples
Say your books start on January 1, 2026, and you signed up for Ambrook in September 2026.
A tractor loan you took out in 2023. It started before your books did. Set the Starting Date to January 1, 2026, and the Starting Balance to what you owed on January 1. Get that amount from your December or January statement, not your latest one. Then tag every payment from January onward.
An operating note you took out in March 2026. You got it before you signed up, but after your books start, so it's treated as a new loan. Set the Starting Date to the day in March you got the loan and the Starting Balance to $0.00. Then record the amount you borrowed (see "Adding a new loan" below) and tag payments from March onward.
Common mistake: entering today's balance with an earlier Starting Date. If you enter the balance from your latest statement but date it at your books start, every payment you tag after that date lowers the balance a second time, and the loan ends up too low. Always use the balance as of the Starting Date. If a loan payment or draw happens on the Starting Date itself, use the balance from the start of that day if the transaction is in Ambrook, or from the end of that day if it isn't. See Finding Your Account's Starting Balance for more.
Can't find a balance for your exact start date? Use the statement closest to that date and adjust for any payments made between the statement date and your start date. Your amortization schedule also shows the balance after each payment, or you can ask your lender for the balance on that date.
Adding a loan you had before your books start date
Go to Accounts and click New Account.
Choose the account type (for example, Loan or Mortgage) and give the account a name.
Set the Starting Date to the date your books start in Ambrook.
Enter the amount you owed on that date as the Starting Balance. Refer to your principal balance only, do not include interest due. If your statement date doesn't match your start date, use your amortization schedule or ask your lender for the balance on that date. Leave the balance direction set to Liability (Credit).
Click Save. The loan now appears on your Accounts page.
Tag every payment made after the Starting Date to this account. Payments made before the Starting Date are already reflected in the Starting Balance, so don't tag them to the loan again.
Tip: If you tag an older payment and Ambrook offers to Adjust Date because the payment is dated before the loan's Starting Date, stop and verify your account details. That payment is already included in your Starting Balance, and moving the date earlier could count it twice.
Adding a new loan taken out on or after your books start date
Go to Accounts and click New Account.
Choose the account type and give the account a name.
Set the Starting Date to the date you got the loan.
Enter a Starting Balance of $0.00 and click Save.
Next, record the amount you borrowed. Choose the option below that matches how you received the money.
The loan money was deposited into your bank account
In the Ledger, find the deposit and click the Category button.
Under Record on Balance Sheet, choose Liability Adjustment.
In the To field, select the loan account, then click Record.
The loan balance now shows the amount you borrowed.
The lender paid the seller or dealer directly
This is common with equipment, vehicle and land loans. No deposit shows up in your bank account.
On the Accounts page, select the loan account and click Adjust Balance.
Enter the amount you borrowed and the date of the loan. This creates a transaction for the loan account on your Ledger.
Tag that transaction to the asset account for what you bought (for example, your Equipment or Land account). See Recording Asset Purchases for details.
If you made a down payment from your bank account, tag that bank transaction as an Asset Adjustment to the same asset account. For a full worked example that covers both the asset and the loan, including payments afterward, see Recording Asset Purchases.
The lender held back fees from the loan
Some lenders subtract origination fees, closing costs or insurance before they deposit the money, so the deposit is smaller than the loan.
Tag the deposit as a Liability Adjustment to the loan account, as described above.
On the Accounts page, select the loan account and click Adjust Balance to add the amount the lender held back.
Tag the transaction this creates to the right category, such as a loan fee expense.
Tip: Some closing costs are added to the cost of the asset rather than expensed. Check with your accountant.
Fixing a Starting Date or Starting Balance
If you entered the wrong date or amount, select the loan account on the Accounts page, scroll to the Details section, and click either the date or balance listed. If the loan's balance shows as a negative number (with a minus sign), check the dropdown next to the Starting Balance. It should say Liability (Credit), not Contra-Liability (Debit). Changing the Starting Date can hide or show transactions and can affect past reconciliations, so double-check the account afterward.
If you have both a connected and a manual account for the same loan
If a loan comes in through your bank connection and you've also added it by hand, payments can end up split between the two accounts, or the loan can show up twice on your balance sheet. Keep one account. See "If you have both a connected and a manual account for the same loan" in Working with a Connected Loan Account.
If your loan balance looks wrong
If the balance isn't going down, is going up, shows as a negative number, or doesn't match your lender's statement, see Troubleshooting Loan Balances.
Frequently Asked Questions
My loan is already connected through my bank. What should I do?
My loan is already connected through my bank. What should I do?
It depends on what your transactions your account has synced. See Working with a Connected Loan Account.
How do I set up a loan from a family member or another business?
How do I set up a loan from a family member or another business?
Follow the same steps. Keep a written payment schedule so you know how much of each payment is principal and how much is interest.
I refinanced my loan. How do I record it?
I refinanced my loan. How do I record it?
Create a new account for the new loan. Record the payoff of the old loan with the new loan (see Recording Loan Payments That Didn't Come From Your Bank Account), then close the old account. See Closing or Reopening an Account.
Someone owes me money. Is that a loan account?
Someone owes me money. Is that a loan account?
No. Money owed to you is an asset, not a liability. See Recording a Loan You Issued to Someone Else.
I'm buying land on a land contract. Is that different?
I'm buying land on a land contract. Is that different?
Yes, slightly. See Recording Land Contracts and Real Estate Financing.
Is this a loan for my home or other personal use?
Is this a loan for my home or other personal use?
See Managing Personal Expenses. If one loan covers both personal and farm property, ask your accountant how to divide it.
Always ask your accountant for guidance on how to treat your specific loan accounts.
